140-11403

2021 Feature Vehicle

PRW is proud to introduce our Project Car for our 2021 Catalog!

Amidst the numerous disruptions caused by COVID-19 this year, PRW has worked hard to maintain our status in the automotive aftermarket parts industry and we’re proud to have upheld our operations along with progressively growing throughout all aspects.  We’ve put in the extra effort to provide our parts and additionally introduce new parts to our product line.

We’d like to introduce another project of ours, set to make a debut on our upcoming 2021 PRW Catalog.  We’ll be working alongside many outstanding companies for this build and will document our progress here.  This blog post will be updated showing steps of our build, which parts and companies we’re working with, and so on.  This will be a great time for all and we’re excited for the journey and final result.

 

 

Take a look at our choice of Radiator for our 2021 Catalog Car Build!

Be Cool, Inc.

has an awesome Direct Fit Downflow Radiator Module which will suit our needs and yours too!

 

 

     Cooling monster motors, especially when faced with common problems like tight spaces and small grille openings can be a challenge. Be Cools cooling technology produces radiators that are 40 percent lighter than conventional O.E.M. units, yet have greater cooling power. Their epoxy-free construction provides better heat dissipation, too, while allowing complete repairability. A mirror-polished finish is an option on all Be Cool radiators.
     High-quality Be Cool radiators are 100 percent made in the North America. Most are made for specific applications, fit without the need for major modifications, and are compatible with all coolants.
They are Guaranteed to lower your coolant temperature a minimum of 20 degrees, or your money back! In fact most customers report even greater coolant temperature drops. If you have a stock vehicle think O.E.M., but if you have a performance vehicle you should consider Be Cool!
     Be Cool goes one step further with our Direct-Fit Radiator Modules. These modules include a Radiator (downflow or crossflow), Electric Fan/s, Fan Mounting Brackets, Wiring Harness with Relay/s, Temperature Sender, Billet Radiator Cap, Diamond-Cut Recovery Tank, and All Necessary Hardware. ❄️
For more information, please check out https://www.becool.com/

Need stopping power? 🛑❓ Our 2021 Catalog Car needs that also! Of course we went with the BEST:

Wilwood Disc Brakes
We used Wilwood Part Number 140-11403 Cross Drilled and Slotted Rotors w/Red Calipers for our 1966 Mustang. 
Forged Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axles on applications that require a parking brake assembly and extra clearance for 14.00” to 15.00” rim applications. Forged billet Dynapro Low-Profile four-piston calipers 11.00” one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.
For more information: Wilwood Disc Brakes

Our 2021 Catalog Car is going under the knife 🔪 Awesome work is being done by

JEP Autoworks which is a FULL SERVICE Performance Automotive Center

JEP Autoworks is a full service automotive repair and performance shop located in the Hemet / San Jacinto Valley. Starting out in 1999 as a general automotive repair facility, JEP has expanded into the business of building, tuning and modifying vehicles establishing our reputation as one of the top names in the performance automotive industry. From off-road vehicles, to full race, to performance street machines and exotics or for just reliable, quality repair services on stock vehicles, JEP Autoworks puts our reputation and quality in every vehicle we work on.

Our 10,000 square foot facility in Hemet, CA features a full showroom showcasing our work and offering a variety of performance speed, stereo and electronic parts & accessories. JEP Autoworks is equipped with a Dynocom 1800X series Chassis Dynometer for vehicle tuning and dyno services. Our 8000 square foot repair bay includes 5 chassis lifts, a 4-post vehicle lift, tire mounting and balancing, welding and metal fabrication equipment. Separate from JEP Autoworks main building is our 3000 square foot paint and body center. The JEP Autoworks showroom and service facility is open Monday – Friday 5 days a week and is available after hours by appointment to accommodate client schedules.

AT JEP our occupation is our passion. We are gear-heads who love what we do and take pride in both our reputation and customer loyalty. All jobs at JEP are seen through to ensure our customer expectations are met and we will always stand behind our work. As both active participants and attendees of automotive events, organizations, races and trade shows in the auto electronics and performance automotive industry we stay up on the latest industry trends & technology to ensure our clients receive the best advice and recommendations we can offer.

For hours, contact and location information please see our contact page. For questions about our work, quotes, project planning or for a tour of our facility contact JEP Autoworks during normal business hours.

Looking into the best suspension setup? Our 2021 Catalog Car was in need of one too!  We obviously went with Global West Suspension.  We chose the Negative Roll Coilover Front End Kit. Part # COMNR-6466V.  Negative Roll is used for a street /road handling application, which was perfect for our build! We have more Global West parts for the rear also so stay tuned!

For More info please check out Global West Suspension

JEP Autoworks has been busy working on our 2021 Catalog Mustang!
Since they are a full service repair and performance shop they have been hard at work offering full paint and body work! The bottom of our mustang is now protected by truck bed liner, and the paint has a great mirror finish!
Follow JEP Autoworks and don’t hesitate to contact them for any of your repair and performance build needs!
Weber Carburetors

Take a look at those carbs. Our 2021 Catalog Car is coming along quite nicely thanks to

JEP Autoworks.
We’re using Weber Carburetors and their Redline Kit. Their v8 Proline Performance kit was a perfect match for our build.
We have started to put together our chosen transmission kit from Silver Sport Transmissions.

Silver Sport Transmissions, an Elite Distributor of TREMEC® Transmissions, is the industry leader in the research and development of kits to modernize the drivetrain of classic cars, trucks and street rods. Their SST A41 Automatic, TREMEC TKO and T5 5-Speeds, and TREMEC Magnum 6-Speed PerfectFit and RestroFit® Kits are the best fitting and most complete kits available.

After seeing how comprehensive their kits are and the attention to detail, it was a no-brainer to choose their Tremec TKO Kit with the TKO 600 Ratios.

Here’s some info on our kit:
  1. Tremec TKO 5 Speed Overdrive
    • 500-600 torque capacity wide or close ratio.
    • No tunnel cutting
    • Compact billet aluminum shifter mechanism provides smooth shifting with short throws. True internal offset with perfect factory shifter positioning.
    • Exclusive SST case customization – CNC machined for a PerfectFit™ without compromise to the transmission
    • Thoroughly tested for leaks and performance.
    • Market Leading Warranty – learn more
    • Optional Carbon Fiber Lined Synchronizer blocker ring upgrade for higher rpm shift capability
    • Lower Cost Option Classic Fit option available for non-console installations. Cutting is required; it will not provide factory shifter positioning.
  1. Crossmember
    • CAD designed, lightweight, easy bolt-in
  2. Driveshaft & Slip Yoke
    • Lightweight, steel, custom driveshaft for superior strength. Dynamically balanced for smooth operation and premium solid u-joints come standard.
  3. Speedometer Connection
    • Mechanical and electronic compatible
  4. Calibrated Speedo Cable or Electronic Speedo Connector – Your choice
  5. Reverse Light Connector
  6. Pilot Bearing
    • Super heavy-duty needle roller type with lube seal for long life
  7. Isolator Mount
    • Rubber for vibration isolation
  8. Installation Hardware
  9. Detailed Installation Instructions – including free lifetime tech support
  10. Market Leading Warranty – learn more

This is just the beginning!  More parts and info on our Transmission Parts from Silver Sport Transmission will be updated soon!

For more information on Silver Sport Transmissions, please check their website:  https://shiftsst.com/

Our 2021 Catalog Car is currently getting new lower side scoops from Maier Racing.
We chose the 65-66 Lower Side Scoops. They actually offer three styles for 65-66 so you’ll be able to choose what fits your style.  Once they’re on and ready, we’ll get down to the nitty gritty and update with more detail!
For more information:  Visit https://www.maierracing.com/
Quick update on our 2021 Catalog Car! JEP Autoworks has been hard at work and the detail shows 😍
Kilmat Car Sound Deadening Mat is currently being installed with their 80 mil thickness mat.
Other competitors have the thickness of their mat at 50-60 mil.

PRW Visits Jep Autoworks to Test and Tune our 1966 Ford Mustang 2021 Catalog Car

 

We took a field trip to JEP Autoworks in Hemet, CA to take a look at the progress of our 1966 Ford Mustang 2021 Catalog Car. The vehicle is near completion and we’re pleased with the wonderful results from JEP Autoworks and the Outstanding companies who helped build this Mustang from the ground up with their products.

Here’s a highlight video of the day showcasing some of the parts used and some dyno clips. We’ll be posting dyno runs and output information soon so stay tuned!

Much thanks to our Friends and Sponsors for the build:

JEP Autoworks
Global West Suspension
Wilwood Disc Brakes
Canton Racing Products
B&M
Eagle
MSD Ignition
Weber Carburetors
Currie Enterprises
Silver Sport Transmissions
Be Cool Inc
Powermaster Peformance Starters and Alternators
Mahle
Inland Empire Driveline
Pacific Performance Products
JBA Performance Exhaust

 

 

Steering is an essential part of a build which doesn’t get enough attention at times.  We’ve looked into what would fit best with our build and our choice was with Unisteer.  They carry great steering systems and components for classic and custom vehicles.  We’ve decided to pick part number 8001110-01-01 that can be seen here.

We liked how the kit was versatile enough to fit different builds, as stated on their website:

“The kit will work on Big Block and Small Block cars, and have been successfully used with Stock Manifolds, and Hooker Super Comp Headers. Other Headers may work, but we can’t guarantee an easy install. This kit requires the use of a mini starter. This kit may require some modifications on Mustangs with Dart Heads and other Aftermarket Heads requiring different headers.”

Installation was a breeze and we had no problems with clearance or any other issues. We’re starting to test drive our Mustang and hopefully testing it on a track soon.  We’ll be updating our testing soon!

For more information with Unisteer, please visit their website: https://www.unisteer.com/

 

Stay Tuned…More to come!

Follow us on Social Media:

Facebook: https://www.facebook.com/PRWPerformanceParts/

Instagram: https://www.instagram.com/prw_industries/?hl=en

Youtube:  https://www.youtube.com/channel/UCY8cnWOvGW_fN8EW6NFU4fA

 

-PRW Industries

Mike Purugganan Oct 21, 2020 2021 Catalog Car 0 Comment Read More
Copyright © 2024 PRW Industries, Inc All rights reserved